
거울부식방지 코팅제
거울 테두리에 코팅하여 방수 및 부식방지 역할을 통해 내구성을 높일 수 있는 코팅제입니다. 기존 IR 및 파라핀 공정에 비해 작업시간이 대폭 줄어들어 생산 공정의 단순화, 불량률 최소화로 인해 생산성 증가를 가져 올 수 있는 제품입니다.

특징
순간완전경화
잉크 소모량 최소화
방수성 우수
생산성 향상
불량 발생률 최소화

적용
거울테두리
거울테두리 방수, 부식방지에 사용

응용 제품
Edge of mirror

Product | |
---|---|
Product name | BS-210 |
Colors | Transparency |
Substrates | Mirror |
Coating metdod | Roll coat, Side coating machine |
Lquid properties | Viscosity 1000cps |
Density | 0.97g/㎤ |
Soild properties | VOC 0% |
UV does | 110w/㎠ |
Gloss | Gloss |
Shrinkageon curing(SVR)Propert | 100% |

Warm Water Test
Constant temperature for 16hr after warm water at 60℃ for 8hr 10 time /pass
Humidity constant temperature for 16hr after the humidity at 60℃, 10 time /pass
Hydrocloric acid hydrocloric acid at 0.5% 48hr/pass
Salt solution salt solution at 0.5% 10days/pass Formalin (JIS A4401)
Soak in the formalin 10days/pass Adhesion(JIS A4401)
Close cutting test surface condition/good Oxygen soda oxygen soda at 20%
10days/pass
Alkali test NaOH1n 48hr/pass
Substrate : Mirror (primer)
Coating method : Side coating machine
Thickness – 50μm
Cure condition – 120w/㎠
Technical information is subject to change without notice.
Shelf Life
6months(temperature : approx. 25°c)
Storage Condition
Avoid uv light, sunlight and fluorescent light.
Store at approx. 25°c in the shade.
Packaging Unit 20kg
Safety Information
Avoid direct contact with the skin use safety glasses/goggles with uv protection, as needed
(may cause skin and eye irritation respiratory tract irritation minimal ingestion hazard)






몰딩레진
BS RF70/50은 PC, PET 플라스틱위에 몰딩을 형성하기 위해서 사용되며 다양한 모양과 선을 가공할 수 있습니다. PC 나 PET 접착력을 향상시키는 복잡한 전처리 기능이 없이도 가능합니다.

특징
금속과 Ni 몰딩으로부터 이형성이 우수함
PET (Poly-ethylene-terephthalate) film 접착력이 탁월함
자외선 경화 레진으로 미세패턴형성 우수
빠른 몰딩 형성

적용
키패드 몰딩
미세패턴형성 몰딩

적용 제품
Metal molds, Ni-mold
몰딩형성공정
Mobile phone decoration, Key pad and Window Lens-Electronic decice decoration, Cosmetic case decoration, etc..
Coating Thickness : 200microns

Dispensing BS RF coating onto Mold
